Definition: Jumper


In EIDE drives, a jumper is an electrically-conductive component that you place over pairs of pins that extend from the circuit board on the hard drive jumper block to connect them electronically. For example, a jumper is one way to designate a hard drive as master or slave. The jumper block is located next to the 40-pin connector on the hard drive.




DID YOU KNOW?  DATA RECOVERY FACTS AND TERMINOLOGY:

Data Recovery Fact

Hard Disk (HD)

Medium for permanent storage of data. Magnetic platters, electronics and mechanics make up a hard disk. The platters are fixed to a spindle. On each side of a platter there is a read/write head. Each platter is divided in to tracks, which again is divided into sectors. A characteristic with hard disks is that the platters and the mechanics are in an airtight enclosure, and that the read/write heads do not touch the platters as long as the platters are rotating. See fly height.

Please visit our Data Recovery Knowledgebase for more facts and terminology.